2015 waterproof led driver ip67 ip66 for street led light, factory direct sale,warranty 5years
Technical specification/data sheet of led driver:
Specification: |
Model | Power factor | THD | Inner Temp. rise | Output power | Input Voltage |
WLED-MSC-100-3000T | ≥0.98 | ≤20% | -30℃~+70℃ | 108W | AC 90V~267V |
Output Current | 3000mA |
Current Accuracy | ±3% |
Output Power | 108W |
DC Voltage | 36V | |
Compliance Voltage | 27~36V | Constant current mode running under the condition of 65% ~ 100% nominal output voltage,and it suitable for LED. |
Ripple&Noise(Max) | 200mVp-p | The measuring method of ripple and noise:using a twisted-pair,and it’s terminal parallel connection 0.1uf with 47uf capacitance,be measured under the 20m bandwidth. |
Line Regulation Rate | ±3% | |
Load Regulation Rate | ±3% | |
Items | Parameters | Notes |
Voltage Range | 90~267VAC | Need deduction under low voltage output, the specific situation please refer to the static-characteristic-curve. |
Frequency Range | 47-63Hz | |
PF | ≥0.98 | |
THD | ≤20% | The maximum input voltage |
Efficiency | 90% | Maximum |
Input current | 1.0A/120VAC | |
Items | Parameters | Notes |
Over Temperature Protection | 130±10℃ | |
Short Circuit Protection | Yes | Hiccup mode, automatic recovery after elimination abnormal status |
Over Current Protection | 110% | Protected mode: The output current exceeds 110%, enters hiccup mode. |
Over Voltage Protection | 44~48V | |
Items | Parameters | Notes |
Working Temp | -30~+70℃ | Need deduction under the high temperature environment condition,the specific situation please refer to the deduction-curve. |
Working Humidity | 20~95%RH,Non-condensing | |
Storage Temp&Hum. | -40~+80℃,10~95%RH | |
Vibration Resistance | 10~500Hz,5G 12min/cycle, X,Y,Z axes each 72min | |
Items | Parameters |
Surge Current | Cold start 50A/230VAC |
Leak Current | <0.75mA/240VAC |
Driven Dimensions | LxWxH=159mm*85mm*51mm |
Weight | 0.8kg |
Waterproof Grade | IP67 |
Items | Standards |
UL/CUL | UL8750,UL1021,CSA-C22.2 NO107.1 |
CE | EN61347-1,EN61347-2-13 |
Insulation Resistance | I/P-O/P,I/P-FG,OP-FG:>100M Ohms/500VDC/25℃/70%RH |
Withstand Voltage | I/P-O/P:3.75KAC,I/P-FG:2KVAC,O/P-FG:0.5KVAC |
EMC Emission | EN55015,EN61000-3-2,EN61000-3-3 |
EMC Immunity | EN61000-4-2,3,4,5,6,8,11,EN61547 |
UL/CUL | UL8750,UL1021,CSA-C22.2 NO107.1 |
CE | EN61347-1,EN61347-2-13 |
Dimensions and drawing:
Our Advantages and main feactures of led driver transformers:
Single channel constant current output
world-wide university AC input:90-305Vac
Built- in active power factor correction function
Lighting protection: CM4KV, DM6KV
ALL-Round protection:SCP,OVP,OTP
Suit for dry, damp and wet locations
5years warranty
Other Features of led driver:
1.Higher PFC>0.98 and low THD<10%
2.Smart and lighter design , easy to install.
3. No fan, good waterproof performance, maintenance-free
4.Soft start, constant wattage output Ballast noise rated class A
5.CE, FCC, UL, CUL, ROHS are approved
6.Prolong lamp life at least 20%
7. Energy-saving at least 30% compared with magnetic ballast
8.Comprehensive protection: short-circuit/ open circuit/overheat/lamp failure protection
9. Dimmable: 50%-100% , Elimination of lamp flicker
10. Maximum lighting distance: 18m
11. High power led white glue injection makes good sealability and good heat dissipation
Professional R&D by working with Zhejiang University makes the best structure to get best performance.
Dimming Options:
no dimming
potentiometers dimming
0-10v/PWM dimming
Programmable dimming
Timing dimming
PLC intelligent control
Factory View:
Application: suit for wet, damp,dry places, IP67
1.Hydroponic/Horticulture/Green house/seeding/farm/flower exhibition/garden/bonsai/aqurium lighting;
2. Outdoor commercial and Architectural lighting,street and tunnel lighting;
3. Fishing lighting
Application photos of led drivers:
Our Internation tradeshow:
Fast feedbacks to any of your questions, welcome to visit our factory.